Disposable Gas Cylinder - 1.43L - 110Bar Nitrogen

SKU: KL01533

Product introduction:

These nitrogen cylinders are perfect for Nitro Stout of Nitro Coffee. If you want to get a really nice creamy head on your stout or nitro coffee thes Read More

Description

These nitrogen cylinders are perfect for Nitro Stout of Nitro Coffee.  If you want to get a really nice creamy head on your stout or nitro coffee these disposable cylinders are the way to go.

This cylinder will dispence a little over 40 liters of stout or nitro coffee.

Stout and nitro coffee requires high pressures (such as 2-3bar) so the product can push through the perforated disk that is inside our nitro spouts like this.  These elevated pressures require nitrogen because if CO2 was used at this high pressure the CO2 would absorb into solution and overcarbonate your beverage (if it's stored cold).  As a result nitrogen is necessary.

Nitrogen doesnt dissove into solution like CO2.  Even at elevated pressures only small amount of nitrogen will dissolve into solution.  It doesn't form the weak hydrogen bond with the liquid like CO2 and for that reason it does not dissolve into water based beverages easily like CO2.

High Capacity Disposable Nitrogen (N2) Gas Cylinder - 1.43L - 110Bar


High Capacity: 157L


(at standard temperature and pressure)
86 grams
FOOD GRADE
Nitrogen (N2)

Specifications
Cylinder Type: 3 Piece Welded Cro-Molly Alloy
Cylinder Volume: 1.43L
Working Pressure: 110bar (1595.42psi)
Test Pressure: 180bar (2610.68psi)


Directions for use
This bottle is compatible with our KegLand M10 Inert Gas Regulator.  It's also compatible with many other regulators already on the market.
1. Remove the protection cap from the valve.
2. Connect the regulator to the cylinder valve. There may be some gas escaping as you're screwing on so screw the gas cylnider into the regulator quickly to limit this loss, continue to screw on until gas stops.
3. Set the outlet flow/pressure on the regulator. Please note to turn off the gas you must remove the regulator from the cylinder.
PLEASE NOTE: If you are removing the regulator at any point you MUST use a spanner to hold the brass neck of the cylinder. Failure to do so could cause the strong adhesive glue to crack and the cylinder detach from the fitting.

To avoid the chance of leaks and returning to an empty bottle, please triple check every connection point on your system or disconnect your gas cylinder between uses.


Please note this item cannot be sent with Australia Post. If you purchase this item and select Australia Post, it will automatically be changed to a suitable shipping carrier. We will contact you if further information is needed.

Shipping

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy

Leave A Message

If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.

请在浏览器中启用JavaScript来完成此表单。