These compact inline regulators have been designed to suit 8mm (5/16") Evabarrier Tubing. For higher pressures such as mains water supply we recommend the 4mm ID Tubing here or 5mm ID here if you do not need as high pressures and you would prefer higher flow rate.
Suits pressures 0-150psi
Suitable for mains water pressure
Suitable for liquid or gas
Made from Acetal/POM, EPDM o-rings and stainless teeth
Suits 8mm (5/16) OD Tubing such as our Evabarrier Tubing
Includes integrated 0-60psi Pressure Gauge
This awesome compact solution for adjusting water and gas pressure can be useful in many different applications. This can be used for compressed air, CO2, nitrogen, mains water supply and many other things.
The unit is made from food grade engineering plastic, stainless steel and quality made EPDM seals.
The design utilizes the reliability of the KegLand patented duotight o-ring system to make sure you can fit hoses to this unit quickly and with leak free connections.
NOTE: These small guages enable the regulator to be so compact however for more accurate pressures readings we recommend getting different guages to suit the pressure range you want to use.
KL14984 - Mini Gauge 0-23psi
KL15004 - Mini Gauge 0-60psi
KL15011 - Mini Gauge 0-150psi
These guages are accurate to about 10% of the range of the pressure gauge. So if you use the lowest range possible it will ensure the best possible accuracy.
IMPORTANT WARNING: Do not exceed gauge pressure. If you set a gauge pressure higher than the graduations on the gauge you can damage the gauge. (ie if you are using the 0-60psi gauge. Do not set pressure above 60psi or damage to the gauge may occur.