T-Bar Flooded Font - Double Tap

These flooded fonts are just what you need to setup your bar / pub or cafe.
This T-Bar font is specifically designed to be used with our G40 Glycol System. When glycol is used instead of water, you are able to enter a special freezing point. Where it won't freeze your beer/cider but will ice up the outside of the font. This is dependent on the strength of your beer. If you are using dispensing light beer, it may freeze. Not recommended for Soda Water lines if you are using glycol for ice look.
This Double T-Bar comes highly recommended to be used with our G40 System. Even though our G40 has 4 product lines, we strongly suggest doubling up your lines (pass through the chiller twice) As the G40 will drop the temperature of the liquid between 15C and 20C with one pass through. 
If you are able to chill your kegs with an under the counter fridge. Then you can use two of these Double T-Bar fonts and split the glycol line to flood both. Depending on the ambient temperature you can get both fonts to ice up. But this will work the compressor twice as hard.
Dimensions:
- 430mm Tall
- Two furthest gaps are 225mm apart.
- 304 Stainless steel, that has been Chrome Plated
- 60mm Hole required through benchtops
- Drainage plumbing is highly recommended

The font does not include taps or K-Lok (Snaplok, FatLock etc) fittings. The recommended K-Lok fittings to use with this font are the K-Lok female x 5/8 male Push InsThe corresponding parts we would also recommend are
- x2 NukaTap SS Tap Only
- x2 K-Lok Tap Shank Adaptors
- x1 4mm ID EVABarrier Hosing 
- x4 K-Joiners Push In (coming soon)
- x1 12m Roll of 10mm ID x 13mm OD Hosing (for glycol line)