PRODUCTS

BrewBuilt X1 Complete Pressure / Vacuum / Spunding Valve Kit
SKU KB05617

Product introduction:

Ferment under pressure in the BrewBuilt X1 Uni Conical with the Pressure Fermentation Kit. This kit includes a Ball Lock BlowTie Spunding Valve kit and a professional 1.5 BAR Tri-Clover Pressure and Vacuum Release Valve. The spunding valve features a 0-15 psi pressure gauge and a hand-adjustable blowoff to dial in your desired pressure setting. The pro PRV provides added safety when fermenting extra-large or high gravity batches where krausen may reach the lid of the fermenter. Fermenting under pressure will reduce esters and fusel alcohol production, and enable you to ferment lagers at ale fermentation temperatures. Not to mention your beer has already started carbonating process when its finished fermenting!
INQUIRE

BrewBuilt X1 Complete Pressure / Vacuum / Spunding Valve Kit

Ferment under pressure in the BrewBuilt X1 Uni Conical with the Pressure Fermentation Kit. This kit includes a Ball Lock BlowTie Spunding Valve kit and a professional 1.5 BAR Tri-Clover Pressure and Vacuum Release Valve. The spunding valve features a 0-15 psi pressure gauge and a hand-adjustable blowoff to dial in your desired pressure setting. The pro PRV provides added safety when fermenting extra-large or high gravity batches where krausen may reach the lid of the fermenter. Fermenting under pressure will reduce esters and fusel alcohol production, and enable you to ferment lagers at ale fermentation temperatures. Not to mention your beer has already started carbonating process when its finished fermenting!

To use this kit with the X1 Uni, you will also need the BrewBuilt Pressure Pack. The spunding valve installs on the gas in ball lock post of the pressure lid. The T.C. PRV then replaces the Blowoff U Barb to seal the conical and protect the unit from over pressurization.

Includes:

  • Ball Lock Spunding Valve
    • Machined Stainless MFL Gas Ball Lock Disconnect
    • 8mm Push In Pressure Gauge (0-1 BAR / 0-15 psi)
    • Hand Adjustable Blowoff
    • duotight 8mm tee piece
    • duotight FFL x 8mm push in piece
    • 2 x rigit plastic joiners
  • Tri-Clamp Pressure Relief Valve
    • 1.5" tri-clamp connection
    • Calibrated to 1 BAR (14.5 psi)
    • Made from 304 stainless steel

 

Caution: With our pressure fermentation kit attached to a BrewBuilt X1 Conical unit there are three points of pressure relief: the relief built into the lid, the relief on the spunding valve, and the commercial PRV (Pressure Relief Valve). If you do see krausen exiting any of the pressure relief valves, you need to immediately release the pressure in the fermenter, clean the relief valves, and ferment the rest of the batch without pressure.

Leave A Message

If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.

SUBMIT