The Cannular can seamer is a manual can seamer that is easy to use, reliable and beautifully simple and with this Semi-Auto Model it just got even easier.  Now you don't even have to pull a lever to seam the can.  The seaming process takes only 3 Seconds!  That's crazy fast.

You will need a 24v Power supply to run this machine with a standard Anderson Plug. 
If you do not have these parts already, we do stock them here - > 500w 24v Power Supply + Anderson Plug Combo
The Pre-Wired 24v Power Supply is not suitable with the Semi-Auto Model Cannular.

KegLand Guarantees the cans that we stock will seam correctly with the Cannular Compact Canning Machine.
If you choose to source cans from another supplier you may need a different die/chuck.

Seaming 202 Body VISY Cans

To seam VISY cans which have a 202 body you will need a CDLE/CDL VISY Chuck 

This cannular is not compatible with slimline VISY cans due to their reduced diameter, it is only compatible with 202 body cans.

Seaming 1L (32Oz) Ball 300 Cans

To seam ball 300 end/lid type, oversized aluminium cans with semi-auto cannular you will need a Chuck and Table for 1L Crowlers.

Seaming 100mm Tin Plated Steel Cans

If you are looking to seam tin cans for food storage for example you will need a Chuck for 100mm Steel Tin Plated Cans.

Whether you're a cool bar wanting to fill your own crowlers or you are a home brewer wanting to keep your home brew fresh and protected from damaging light, the Cannular is the answer.  The Cannular can seamer is one of the most compact and easy to use benchtop can seamers around.  With a single operator you can seam/seal the cans in 3 seconds meaning this compact machine is suitable for small breweries or brewpubs doing small production runs.

Semi-Auto Design
This new Semi-Auto Model of can seamer is able to guarantee you get a consistent seaming process every time. Unlike our less expensive manual can seamer this machine has no lever meaning it's even easier for the operator to seam the can consistently and will not vary on how hard the operator is pulling the lever.  Once the machine is tuned only a small amount of oil on the bearings is required and no other maintenance for 50,000 cans.  

Safe To Use with Low Voltage Power Supply
If you have ever used a can seamer you would know that you can sometimes spill liquids while processing cans.  As a result, we have made the Cannular machine with 24v DC so even when you make a mess you don't have a risk of electrocuting yourself.  This also makes the machine easier to clean and wash down.

Environmentally Friendly
When compared with disposable glass bottles cans are much more environmentally friendly as they are:
* Significantly lighter making them less energy-consuming to transport
* More recyclable, more cost-effective to recycle, and a higher percentage of cans get recycled in Australia when compared with glass

Great For Outdoor Events
Cans are a fantastic choice for outdoor events, parties, pool events, or at the beach.  Broken glass can be dangerous and difficult to clean up completely. Cans on the other hand are the safest choice in this respect.

Preserve the Products Quality and Freshness
Gas Barrier - Although a glass bottle is completely airtight, the crown seals allows a small migration of CO2 out of the beverage and allows small amounts of oxygen to get ingress as the rubber seal is permeable.  So as a packaging solution glass bottles are imperfect and the product quality will degrade more rapidly due to this gas migration. Aluminium cans have a hermetic metal on metal seal that is impervious to gas transmission.
Light Block - Many beverages especially beer can get damaged quickly due to light.  If you expose many beers to sunlight for even 5 minutes the beer can become light damaged ("skunked").  Even softer light such as indoor lights will damage beer over time and noticeable skunking can occur with both incandescent and fluorescent light globes within hours.  So unless you keep your glass bottles in the dark all the time you will compromise the beer quality.  Aluminium cans solve this problem by blocking 100% of damaging light.

Do you want to make the canning process even cleaner?  Get the Splash Guard Kit
This splash guard kit attaches to your manual canning machine and makes the whole process a lot cleaner and prevents splash coming off the sides of the can making a mess.  A highly recommended add-on product.  The splash guard kit can be found with part number KL16728 and can be seen below:

Do you want a storage solution for your cans?  Why not get a can crate like this one:

If you are interested in reading a review on the product you can find this one on Home Brew Finds.  This review was done by Brad Probert who has a great website called www.beersnobby.com